Published by adminJan 22,2021

LED grow light from Aglare Lighting

Shenzhen Aglare Lighting Co., Ltd. was established in 2005 and is a professional Led outdoor and indoor lighting manufacturer with more than 15 years of production experience. In 2020, in order to serve more customers, but also for topology and development of our industry, our company decided to add an LED grow light department. At the same time, Shenzhen Aglare Lighting Co., Ltd. officially changed its name to Shenzhen Aglare Group. There are four business divisions under the group, namely LED components division, amusement lamp division, outdoor lighting division and grow light division. The company's main products are LED grow lights, LED amusement lights, Led RGB external control point light sources, Led internal control 1-4\1-6\1-8\1-12\1-16 follow-up amusement lights and supporting Power supply and controller, also produce Led floodlights, Led high bay lights, led tunnel lights, Led street lights, SMD Led, COB Led and other Led products. The company has two production bas...

Do you like ? 1,759

Read more

Published by adminJan 22,2021

How high is the plant grow lights installed?

How high is the plant grow lights installed? The installation of LED plant grow lights must be scientific in order to effectively improve the light utilization rate of plant lights. In order to ensure the plant's supplementary light intensity, the plant's supplementary light should be placed as close as possible to the plant, and the distance should be set according to the power of the plant's light. Generally, the closer the distance between the plant lamp and the plant, the higher the light utilization efficiency. Use LED plant lights to fill light, because LED heat energy is very little, it will not burn plants, it can be irradiated at close distances, which can be 10 cm. For plant lights with power less than 8W, the irradiation distance is about 0.5 meters, and for plant lights with power greater than 8W, the irradiation distance can be between 0.7-1 meters. Pay attention to the following principles when using distance: For general household use, plant succulents, green plant...

Do you like ? 1,633

Read more

Published by adminJan 21,2021

How to reasonably control the irradiation time of plant grow lamps?

Control the irradiation time with Plant grow lamps according to the light-loving degree of plants. It is generally believed that almost all living things need rest, so it is definitely not feasible to use Plant grow lamps to fill plants with light 24 hours a day. After many studies and experiments, it is proved that the time to fill plants with light is controlled at 16-- 18 hours is appropriate, and 4-6 hours of rest time is needed for the plants. For light-loving plants, under clear weather conditions, the time period during which sunlight can meet their growth needs is generally between 10:00-17:00, and in this case, it needs to be between 6:00-10:00 and 17:00- -00:00 The LED plant light is used to fill the light for the plants, which means that it takes about 11 hours to fill the light with the plant growth light. (Note: the plant rest time should be between 00:00 and 6:00). In the same way, if plants do not have very high light requirements, they can already meet their growt...

Do you like ? 748

Read more

Published by adminJan 15,2021

What is chlorophyll?

Chlorophyll is one of the most important color pigments related to photosynthesis. Photosynthesis is the process of converting light energy into chemical energy by synthesizing some organic compounds. Chlorophyll actually exists in all organisms that can create photosynthesis, including green plants, prokaryotic blue-green algae (cyanobacteria) and eukaryotic algae. Chlorophyll absorbs energy from light, which is then used to convert carbon dioxide into carbohydrates. Chlorophyll is the main pigment for photosynthesis in plants. It is a family of lipid-containing pigments located in the thylakoid membrane. Chlorophyll absorbs most of the red and purple light but reflects green light, so chlorophyll appears green, and it plays a central role in the light absorption of photosynthesis. Chlorophyll is a magnesium porphyrin compound, including chlorophyll a, b, c, d, f, prochlorophyll and bacterial chlorophyll, etc. Chlorophyll is not very stable and will be decomposed by light, acid, a...

Do you like ? 1,334

Read more

Published by adminJan 13,2021

The effect of light quality on plants

Different light qualities or wavelengths of light have significantly different biological effects, including different effects on the morphological structure and chemical composition of plants, photosynthesis, and organ growth and development. Red light Red light generally inhibits internode elongation of plants, promotes tillering, and increases the accumulation of chlorophyll, carotenoids, soluble sugars and other substances. Red light can promote the growth of leaf area and β-carotene accumulation of pea seedlings; lettuce seedlings are pre-irradiated with red light and then applied with near-ultraviolet light. It is found that red light can enhance the activity of antioxidant enzymes and increase the content of near-ultraviolet absorption pigments, thereby reducing near-ultraviolet light. Ultraviolet light damages lettuce seedlings; full-light experiments on strawberries found that red light is beneficial to increase the content of organic acids and total phenols in strawberries...

Do you like ? 749

Read more

Published by adminJan 08,2021

Several Light distribution plan for LED plant grow lights

                                                               Light distribution plan 1—discontinuous wavelength red + blue collocation The wavelength of general plant growth supplement light is 660nm (plant red light) + 450nm (plant blue light), two simple wavelength combinations. The ratio is set according to different plants. Generally speaking, the ratio of red light is relatively more. a. Flowering and fruiting type, the ratio of red light is higher, usually the ratio of red to blue is 7-12:1 b. Leaf and rhizome plants, the ratio of red light is relatively low, usually the ratio of red to blue is 15:1 Advantage: 1. Different ratios of red and blue can be designed with universal applicability. 2. The spectrum matching scheme is simple, and the circuit design is relatively simple. 3. The efficiency is medium and the yield is low. Disadvantages: 1. When the solution is used in linear plant lights, the light mixing is uneven. 2. Compared with the full spectrum solution, the elect...

Do you like ? 719

Read more

Published by adminJan 07,2021

Two major effects of 730nm far-red LED on plants

Two major effects of 730nm far-red LED on plants 1. 730nm far-red light's shade avoidance effect One of the most important effects of 730nm far-red light illumination on plants is shade avoidance (Figure 3). If the plant is only irradiated by the deep red light of 660nm, the plant will feel that it is under direct sunlight and grow normally. And if the plant is mainly irradiated by the far-red light of 730nm, the plant will feel as if it is blocked by another taller plant from the direct light of the sun, so the plant will grow harder to break through the obscuration. Helping plants grow taller, but it does not necessarily mean there will be more biomass (bio mass). 2. Flower inducing effect of 730 nm far-red light Another important role of 730nm far-red light in horticultural lighting applications is that the flowering cycle can be controlled by 660nm and 730nm lighting, without relying only on the influence of seasons, which has important value for ornamental flowers. The convers...

Do you like ? 781

Read more

Published by adminJan 06,2021

The effect of light on plants.

Light has a particularly important position in the growth and development of plants, and it affects almost all growth stages of plants. The effects of light on plants are mainly manifested in two aspects: One is to provide radiant energy for plant photosynthesis. The second is as a signal to regulate many physiological processes throughout the life cycle of plants. The effect of light on plant growth-photosynthesis and phytochrome Generally, the growth and development of plants rely on sunlight, but the factory production of vegetables, flowers and other economic crops, tissue culture, and the propagation of test-tube seedlings also require supplementary light from artificial light sources to promote photosynthesis. Photosynthesis refers to the process by which green plants use light energy through chloroplasts to convert carbon dioxide and water into organic matter that stores energy and release oxygen. The key participant in this process is the chloroplast inside the plant cell. U...

Do you like ? 924

Read more

Published by adminJan 05,2021

What are the effects of red and blue LED plant grow lights?

What are the effects of red and blue LED plant growth lights? For plants The wavelength of red light is mainly concentrated in 630~660nm, Its role is to help plants bloom and bear fruit. The blue light wavelength is mainly concentrated in 450~470nm,Its role is to help plants grow stems and leaves. Therefore, the Aglare LED plant grow light on the market mainly use red and blue light. In addition to biological Red light is mainly used for infrared light. At present, most regular hospitals use infrared light to kill viruses, mainly for wound healing treatment. Blue light is mainly used to help sleep and beauty as well as whitening teeth. At present, there are many related products on the market, most of which are concentrated in foreign countries, and the domestic use is still relatively small. To meet their special needs in various fields. With the continuous improvement of science and technology, people's research on LEDs has continued to deepen, and LEDs will gradually benefit man...

Do you like ? 772

Read more

Published by adminDec 31,2020

What are the types of plant grow lights? How to choose?

Indoor plant grow lights can shine when and where there is no sunlight. They can allow you to extend the growing season of plants; they can supply flowers, healthy vegetables and herbs throughout the year; they can also allow your seedlings to grow in advance before planting outside. Due to the different spectra, there are several types of grow lamps on the market, from simple incandescent lamps, fluorescent lamps to HID to LED lamps.The following introduces the different types of plant growth lamps on the market, their prices, and their advantages and disadvantages. Incandescent lamps are the lowest priced plant growth lamps. A good 150-watt light bulb can be purchased at a local hardware store for only a few dollars. Incandescent lamps can keep plants growing in a small house, but it is not the best choice if it is an indoor large garden. Fluorescent grow lamps have low output, are too large and bulky to play a very good role, so they are used as growth light for seeds or seedlin...

Do you like ? 755

Read more

Published by adminDec 11,2020

What are the benefits of using plant grow lights in greenhouses?

According to the latest market research report, compared with other similar products, the LED plant grow lights has lower cost and more power saving. Therefore, the lighting of LED plant grow lights is being rapidly adopted. Because the LED plant grow lights lighting system can effectively promote plant growth, LED plant grow lights are also widely used worldwide. Compared with previous high-pressure sodium lamps and metal halide lamps, LED plant grow lights are more powerful and efficient. They can save power and generate less heat. Less heat allows the plant light to be closer to the plant without worrying about the plant being scorched. This generation of plant growth lights can turn on a dramatic "power saving mode", providing unparalleled product reliability. Plant lighting fixtures show that plant growth lights are changing. They can accurately provide low-power consumption, high-efficiency uniform light pattern and light distribution with suitable wavelength and color ratio,...

Do you like ? 804

Read more

Published by adminDec 10,2020

The role of full-spectrum plant grow lights.

The role of full-spectrum plant grow lights: The full-spectrum plant grow lights is an artificial light source with full-spectrum developed in accordance with the law of plant growth and the principle of simulating the ratio of the solar spectrum. The radiation range is wide, reaching more than 100LM per watt, which truly meets the requirements of green lighting. For agricultural greenhouses, as supplementary light, light can be enhanced at any time of the day, so as to always help plants photosynthesize. Especially in the winter months, the effective lighting time can be extended. Whether at dusk or at night, it can effectively extend and scientifically control the light required by plants without being affected by any environmental changes. In a greenhouse or plant laboratory, it can completely replace natural light to promote plant growth. After application tests, the wavelength of the full-spectrum plant light is very suitable for plant growth, flowering, and fruit. Generally, i...

Do you like ? 1,447

Read more
12 Next > >> Page 1 / 2